Instruction manual

Teranex Processor Settings
24
Audio Setup Menu
The Audio Setup menu in the Teranex 2D and 3D Processors includes analog audio input reference level
adjustment and analog input type selection.
Analog In Level
Teranex 2D and 3D Processors are factory set to analog audio input reference levels of +4dBu = -20dBFS.
If you are using a different analog input reference level, you may adjust the Level control to compensate.
Please note that this setting will not affect the RCA audio input level.
Turn the knob to adjust. The range of adjustment is -12 to +12dB. Pressing the knob will return the level
to zero.
Analog Input Menu
The Audio Setup menu lets you select between the analog audio inputs. The choices for Teranex 3D
are RCA Phono or XLR. The choices for Teranex 2D are RCA Phono or DB25.
 RCA – Stereo RCA Phono connectors (L/R) - Default for the Teranex 2D and 3D Processors.
 DB25 (Teranex 2D) – Balanced analog audio input via the DB25 connector.
 XLR (Teranex 3D) – Balanced analog audio input via the XLR connectors.
Audio Menu>Setup
Audio
Audio
Mapping
Audio
Gain
Audio
Delay
Setup
Main Menu
Audio Reference
3D
Ancillary
Data
Noise
Reduction
Video
System
Setup
Main Menu>Audio
Setup
0.0
Analog
In Level
Analog
Input
Setup Menu>Analog In Level
XLR
RCA
Setup
Analog
Input
Analog
In Level
Setup Menu>Analog Input