Instruction manual

Teranex Processor Settings
22
Audio Menu Settings
The Audio menu permits mapping of input audio channels, offers control of audio gain and delay and
provides access to certain setup parameters.
Audio Mapping
The Audio Mapping menu allows you to map incoming audio channels, decoded Dolby channels or
internally-generated test tones to any output channel. You may also mute individual audio channels.
Step 1. On the front panel, select your audio input source, either EMBED, AES or ANLG.
Step 2. Go to the Audio Mapping menu, then press the Prev or Next buttons to select the desired
output channel. The current audio input associated with the selected output will be displayed
in the drop-down list as you step through the output channels.
Step 3. Once the desired output channel has been selected, turn the knob to select the input source
to map to that output channel. As you turn the knob, you will progress through each group
of sources:
 Inputs 1-16 – This is a list of available audio input channels from your selected input audio
source: SDI, AES, or Analog.
 Dolby Decoded Channels – If the optional Blackmagic Dolby decoder is installed, Dolby
D (Dolby 1-6) or Dolby E (Dolby 1-8) will appear in the list.
 Dolby Encoded Channels – If the optional Blackmagic Dolby D or E encoder is installed,
Encode 1 and Encode 2 will appear in the list.
 Test Tones – Select from internally generated tones: 0.75 kHz, 1.5 kHz, 3 kHz, 6 kHz.
 Mute – Mutes the specific output channel.
Step 4. Pressing the knob will return the current output channel to its default input. Pressing the Reset
All button will return all output channels to their default settings, i.e. Input 1 to Output 1, Input
2 to Output 2, etc.
Audio Menu>Audio Mapping
Channel 1 Source
Audio Mapping
Input 2
Input 3
Input 4
Input 5
Input 1
Reset
All
Next
Prev
Audio Mapping Menu
Audio
Audio
Mapping
Audio
Gain
Audio
Delay
Setup
Channel 4 Source
Audio Mapping
Input 2
Input 3
Input 4
Input 5
Input 1
Reset
All
Next
Prev
Input 1 mapped to Output 4
Tone 1.5 kHz
Mute
Tone .75 kHz
Tone 6 kHz
Tone 3 kHz
Channel 13 Source
Audio Mapping
Reset
All
Next
Prev
3 kHz tone mapped to
Output 13
Dolby 2
Dolby 3
Dolby 4
Dolby 5
Dolby 1
Channel 1 Source
Audio Mapping
Reset
All
Next
Prev
Dolby 1 mapped to Output 1
Tone 1.5 kHz
Tone 6 kHz
Tone 3 kHz
Mute
Tone .75 kHz
Channel 16 Source
Audio Mapping
Reset
All
Next
Prev
Output 16 is muted
Above are examples of audio mapping choices.
Main Menu
Audio Reference
3D
Ancillary
Data
Noise
Reduction
Video
System
Setup
Main Menu>Audio