Instruction manual

Teranex Processor Settings
20
Test Patterns Menu
The internal test signal generator provides a Blackburst output and test patterns. You can add audio test
tones via Audio Mapping in the Audio Main Menu. For more information on audio mapping see page 22.
Above are test patterns available via the Video/Test Patterns menu.
Advanced Menu Settings
The Teranex 2D and 3D provide the following advanced cadence correction features:
Clean Cadence
Creates a clean 3:2 pull down sequence in your 59.94 output video.
Setting Clean Cadence
Turn Clean Cadence on or off using the soft menu buttons and rotary knob.
 On – Selects the Clean Cadence mode
 Off – Selects the Normal video mode
 The default mode is OFF
Use the Clean Cadence mode when you are certain your source material was originated with a 3:2
pulldown sequence, such as film transferred to video by a telecine. If Clean Cadence is used on video
without 3:2 pulldown, unwanted artifacts may be seen.
Clean Cadence is available for the following format conversions:
 486i59.94 to 486i59.94
 486i59.94 to 1080i59.94
 1080i59.94 to 486i59.94
 1080i59.94 to 1080i59.94
Video
Proc
Amp
Test
Patterns
Setup
Aspect Advanced
Clip
Color
Colorbar 75%
Black
Grid
SMPTE 75%
Res Chart
Off
Test Patterns Menu
Video
Advanced
Test
Patterns
Proc
Amp
Aspect
Setup
Clip
Color
Video Menu>Test Patterns
SMPTE 75%.
Colorbar 75%. Res Chart. Grid.
Video
Advanced
Proc
Amp
Test
Patterns
Aspect
Setup
Clip
Color
Video Menu>Advanced
Off
On
Advanced
FRC
Aperture
Source
Type
Scene
Detect
Clean
Cadence
Advanced Menu>Clean
Cadence