Instruction manual

Teranex Processor Settings
19
Analog Output Video Setup Menu
In the Teranex 2D and 3D Processors, this menu lets you set the analog video output type.
 Component – Sets the analog output BNC connections as component Y, R-Y and B-Y.
 Composite – Sets the analog Y/NTSC/PAL output BNC connector as composite.
 The default setting is Component.
Video Sampling Menu (for Teranex 3D Processor only)
The Output Sampling menu allows selection of the following sampling types for the Teranex 3D Processor.
 4:2:2 – YUV
 4:4:4 – YUV
 4:4:4 – RGB
Dual Link Output Menu (for Teranex 3D and Teranex Express)
This menu allows you to turn Dual Link Output On or Off. When On, the Teranex 3D and Teranex Express
will support 3G dual link outputs, while the Teranex Express will also support 6G dual link outputs.
When Off, the Teranex 3D will provide redundant single link outputs up to 3G (Level B) on Outputs A
and B. On the Teranex Express, Output A will support a single link output up to 12 Gb/s, while Output
B will support single link outputs up to 6 Gb/s.
Proc Amp Menu Settings
Use the Proc Amp Menu to adjust gain, saturation, hue, sharpness and more. The Proc Amp Menu is
accessed via the Video menu. A quicker way to reach this menu is by pressing one of the Proc Amp
Video buttons on the control panel. Turn the rotary knob to adjust your settings.
After adjustment, the associated button will illuminate white to indicate a non-default setting. To reset
to its default setting, select the parameter via the Proc Amp Menu or control panel button and then
push the rotary knob. To easily return all parameters to their default settings, go to the Proc Amp Menu
and select Reset All.
 Gain – Range: -60 to +60. Default: 0
 Saturate (Saturation) – Range: -60 to +60. Default: 0
 Black – Range: -30 to +30. Default: 0
 Hue – Range: -179 to +180. Default: 0 degrees
 R-Y and B-Y – Range: -200 to +200. Default: 0
 Sharp (Sharpness) – Range: -50 to +50. Default: 0
 Reset All – Resets all Proc Amp parameters to their default values
Video
Advanced
Test
Patterns
Proc
Amp
Aspect
Setup
Clip
Color
Video Menu>Setup
Composite
Component
Setup
Video
Sampling
Analog
Output
Analog
Input
Dual Link
Output
No Input
Setup Menu>Analog Output
4:4:4 YUV
4:4:4 RGB
4:2:2 YUV
Setup
Video
Sampling
Analog
Output
Analog
Input
Dual Link
Output
No Input
Setup Menu>Video
Sampling
On
Off
Setup
Video
Sampling
Analog
Output
Analog
Input
Dual Link
Output
No Input
Setup Menu>Output
Dual Link
Proc Amp
0
Sharp
Hue
Black
Reset
All
R-Y / B-Y
Saturate
Gain
Proc Amp Menu>Gain
Video
Advanced
Test
Patterns
Proc
Amp
Aspect
Setup
Clip
Color
Video Menu>Proc Amp