Instruction manual

Teranex Processor Settings
17
Clip
To adjust luminance and chrominance clipping on your output video, go to Main Menu>Video>Clip.
Adjust high and low ranges using the rotary knob.
Aspect
To adjust the aspect ratio settings of your Teranex output video, go to Main Menu>Video>Aspect>Adjust
Aspect, or simply press the ADJ button in the front panel. FILL defines a color for the letterbox or pillar
box bars.
Adjust Aspect
To customize the aspect ratio size, position and trim settings, use the soft menu buttons and rotary knob.
 Size – The Size setting adjusts the horizontal and/or vertical image size.
The range is approximately -50 to +200 percent.
 Position – Position allows you to move the input image within the output frame.
The range of adjustment is dependent on the current image size.
 Trim – Trim masks the edges of your input image horizontally and/or vertically.
 Horizontal – Used for horizontal sizing, positioning and trimming.
 Vertical – Used for vertical sizing, positioning and trimming.
 Both – Links horizontal and vertical controls together. For example, when changing the input
image size, linking both controls maintains the proper aspect ratio.
 Reset All – Press to return all settings to their default values.
Video
Aspect
Advanced
Test
Patterns
Proc
Amp
Setup
Clip
Color
Video Menu>Aspect Menu
Video
Aspect
Clip
Advanced
Test
Patterns
Proc
Amp
Setup
Color
Video Menu>Clip
Clip
4
Reset
All
Chroma
High
Chroma
Low
Luma
High
Luma
Low
Clip Menu
Aspect
Zoom
Crop
Fill
Adjust
Aspect
Aspect Menu
Size
0
Trim
Position
Size
Reset
All
Both
Vertical
Horizontal
Position
0
Trim
Position
Size
Reset
All
Vertical
Horizontal
Horizontal>PositionHorizontal>Size
0
Trim
Position
Size
Reset
All
Both
Vertical
Horizontal Trim
Horizontal>Trim