Instruction manual

Developer Information

Network Conﬁguration

The next block shows the TCP/IP networking conﬁguration:

NETWORK:↵

Dynamic IP: true↵

Static address: 192.168.2.2↵

Static netmask: 255.255.255.0↵

Static gateway: 192.168.2.1↵

Current address: 192.168.1.101↵

Current netmask: 255.255.255.0↵

Current gateway: 192.168.1.1↵

↵

The network settings preﬁxed with CURRENT show the active TCP/IP settings, and are read-only. The

CURRENT settings reﬂect either the DHCP or Static conﬁguration, depending on the DYNAMIC IP ﬂag.

Monitor Settings

Finally there is a conﬁguration block for each monitor, i.e. for each LCD panel. The monitor header indicates

the number of the monitor e.g. A or B for SmartView Duo, and always A for SmartView HD.

MONITOR A:↵

Brightness: 255↵

Contrast: 127↵

Saturation: 127↵

Identify: false↵

Border: none↵

WidescreenSD: off↵

↵