Instruction manual

Using Blackmagic UltraScope
14
Blackmagic UltraScope
The Blackmagic UltraScope card features:
 1x SDI input, with BNC connector
 1x SDI loopthrough output, with BNC connector
 1x Optical Fiber SDI input, with LC optical fiber connector
 1x Optical Fiber SDI loopthrough output, with LC optical fiber connector
The choice of input can be selected in the Picture Display of the Blackmagic UltraScope software.
Any signal received by an UltraScope input is looped through to both outputs which means that UltraScope
can be used for inline waveform monitoring. Any adjustments made to the video source can immediately
be seen with Blackmagic UltraScope and looped through to a destination such as a video router, deck
or monitor.
Pocket UltraScope
Pocket UltraScope features:
 1x SDI input, with BNC connector
 1x USB 3.0 port
Any adjustments made to the video source can immediately be seen with Blackmagic UltraScope.
Using Blackmagic UltraScope