Instruction manual

Welcome
25
Blackmagic Media Express – Capture
25
Capture operations are performed in the Capture view (ctrl-1, cmd-1)
Capturing on the fly.
Ensure the Project Video Format is set to the format of video you wish to capture.
Ensure the Capture File Format is set to the format you wish to capture.
Connect a video source to an input of your Intensity. Ensure the desired input has been selected in the Blackmagic
Design Control Panel (Windows) or Blackmagic Design system preferences (Mac OS X).
Enter Reel and Name information into the information area. The Name will be applied to the clip(s) which are
about to be captured.
Before capturing, the audio channels to be captured can be switched on or off via the track enable/disable
buttons. The video track cannot be turned off.
Click on the “Capture” button to commence capturing.
To end capture, click on the “Capture” button again or press the “Esc” key.