Instruction manual

Blackmagic Software
18
Setting Blackmagic Preferences
Remove Filter Jitter
“Remove field jitter when video is paused” allows Intensity to display only a single field when paused, while
turning this mode off will display a complete frame in pause. Single field eliminates field flicker from paused
images and most people would choose to enable this setting.
If you’re doing work without interlaced video, such as animation, then you can turn this mode off
so you can see both fields in full resolution for best quality. Regardless of this setting, you always get the
correct full frame dual field output when in playback mode, as this setting only effects paused video.
HDTV Up/Down/Cross Conversion
The software drivers included with Intensity can be used to downconvert high definition video to NTSC or
PAL video in real time during capture or playback.
Cross conversion from HD 720p to HD 1080i can be enabled during playback.
Up conversion from SD to HD can be performed during capture. If your project is in the HD 1080i format,
your SD video will upconvert to HD 1080i. If your project is in the HD 720p format, your SD video will
upconvert to HD 720p when an upconversion option is chosen.
Output Processing during playback
 HD to SD Letterbox
 HD to SD Anamorphic
 HD 720p to HD 1080i
Input Processing during capture
 1080i HD to SD Letterbox 16:9
 1080i HD to SD Anamorphic 16:9
 720p HD to SD Letterbox 16:9
 720p HD to SD Anamorphic 16:9
 SD Letterbox 16:9 to HD
 SD Anamorphic 16:9 to HD
Select Input Processing
Select Output Processing