Instruction manual

Using HyperDeck Shuttle
27
Installing the HyperDeck Shuttle Mounting Plate
HyperDeck Shuttle Mounting Plate is an optional accessory which lets you secure your HyperDeck
Shuttle to a camera rig with your choice of rail mounts, cold shoe mounts, articulated arms and more.
You can also use the plate to power your HyperDeck Shuttle from an external battery by attaching
a V-Mount or Anton Bauer style battery plate. HyperDeck Shuttle Mounting Plate is available for
purchase from Blackmagic Design resellers. For easy installation, please follow these simple steps.
Step 1. Peel back the rubber mat from all four corners of the base so you can just see the screws.
Remove all four screws.
Step 2. Remove the base.
Step 3. Attach your HyperDeck Shuttle Mounting Plate using the supplied socket head screws.
1
3
2
4
1
3
2
4
1
3
2
4
Step 1 Step 2 Step 3
The contents of the box includes:
x1
HyperDeck Shuttle
Mounting Plate
x4
Socket Head Screws
M3 x 10mm
You will need:
x1
Hex Allen Key 2.5mm
(not included)