Instruction manual

Developer Information
67
clip id: {Clip ID or "none"}↵
video format: {Video format}↵
loop: {"true", "false"}↵
↵
The "timecode" value is the timecode within the current timeline for playback
or the clip for record. The "display timecode" is the timecode displayed on
the front of the deck. The two timecodes will differ in some deck modes.
Asynchronous transport information change notification is disabled by
default and may be configured with the "notify" command. When enabled,
changes in transport state will generate a "508 transport info:" asynchronous
message with the same parameters as the "208 transport info:" message.
Video Formats
The following video formats are currently supported on HyperDeck Studio:
NTSC, PAL, NTSCp, PALp
720p50, 720p5994, 720p60
1080p23976, 1080p24, 1080p25, 1080p2997, 1080p30
1080i50, 1080i5994, 1080i60
HyperDeck Studio Pro adds supports for 4k formats:
4Kp23976, 4Kp24, 4Kp25, 4Kp2997, 4Kp30
Video format support may vary between models and software releases..
File Formats
The HyperDeck Studio and HyperDeck Studio Pro currently support the
following file formats:
QuickTimeUncompressed
QuickTimeProResHQ
QuickTimeProRes
QuickTimeProResLT
QuickTimeProResProxy
QuickTimeDNxHD220
DNxHD220
Supported file formats may vary between models and software releases.