Instruction manual

Using Blackmagic Media Express
35
Capture
Capturing video is easy. All you need to do is connect HyperDeck Studio Pro via a Thunderbolt cable,
set the Media Express preferences and press the Capture button.
Step 1. Connect your video source to an input on HyperDeck Studio Pro.
Step 2. Check that HyperDeck Studio Pro is set to the input you have connected your source to.
e.g. SDI, HDMI or analog.
Step 3. Open Media Express and set its preferences to the project video format and capture file
format. The project video format must be set correctly otherwise you will not see your video
in the preview pane.
Step 4. Click the red Log and Capture tab and enter a description for your video into the Description
field of the logging information area.
Step 5. Click the "+" button next to the Description to add it to the automatic Name field. Click the
"+" button next to any of the other fields that you wish to add to the Name field.
 You can increment the value in each of these fields by clicking on the corresponding
clapper board icon. Alternatively you can type directly into any field to customize its
name and number.
 The text in the automatic Name field will be applied to the clip(s) which are about
to be captured.
 Click the "star" icon next to the Name field if you want to log the clip as a favorite.
 Click the "!" icon next to the Name field if you wish a clip name confirmation prompt to
appear before every capture. This will provide you with the chance to change the clip name.
Step 6. Set the desired number of audio channels to be captured.
St ep 7. Click the “Capture” button to start recording. To end capture, click the “Capture” button
again to automatically keep the clip. Alternatively, press esc if you want to be prompted to
delete or save the clip. The captured clips will be added to the Media List.
Set the desired number of audio channels to be captured
Enter a description for your video
Click the Capture button to commence recording