Installation and Operation Manual HyperDeck Disk Recorders Mac OS X™ Windows™ September 2014
Welcome We hope you share our dream for the television industry to become a truly creative industry by allowing anyone to have access to the highest quality video. Our range of HyperDeck disk recorders have made it easier and more affordable than ever to record and play back full 10 Bit uncompressed video and now Ultra HD 4K! HyperDeck records directly to removable 2.5” Solid State Disks (SSDs) that are getting bigger, faster and more affordable every day.
Contents HyperDeck Disk Recorders 5 Getting Started Introducing HyperDeck 5 Plugging in Video Sources 6 Connecting Video Outputs 7 Timecode Run Recording 18 Shuttling with HyperDeck Shuttle 18 Jog and Shuttle with HyperDeck Studio Models 18 Ref Input 19 Recording Video 7 RS-422 Control 19 Playing Video 8 What is RS-422 Control? 19 10 Using HyperDeck Using an External RS-422 Controller 19 Daisy-chaining for Crash Recording 20 About SSDs 10 Supported RS-422 Commands
Contents HyperDeck Disk Recorders 33 Using Blackmagic Media Express 41 Using Blackmagic UltraScope 52 Using Blackmagic Disk Speed Test 55 Developer Information Blackmagic HyperDeck Ethernet Protocol 55 Protocol Commands 55 Protocol Details 57 70 Help 71 Warnings 72 Warranty
Getting Started 5 Getting Started Introducing HyperDeck There are three models of HyperDeck disk recorders, which all have internal 3 Gb/s SATA ports for use with standard 2.5" SSDs. HyperDeck Shuttle HyperDeck Studio HyperDeck Shuttle HyperDeck Shuttle is compact, affordable and battery powered, so it’s perfect as a field recorder. HyperDeck Shuttle bypasses your camera’s compression and records from SDI and HDMI directly into the highest quality uncompressed video.
Getting Started INPUT DISP REM INPUT DISP REM Plugging in Video Sources +12V POWER HDMI IN HDMI OUT SET SDI OUT SDI IN HyperDeck Shuttle HDMI and SDI inputs. Power on the unit. If HyperDeck Shuttle does not power on, you may need to charge the battery. Simply plug in the power adapter and turn HyperDeck Shuttle on. The battery will continue to charge as long as the power adapter is connected.
Getting Started INPUT DISP SET INPUT DISP REM JOG REM Connecting Video Outputs +12V POWER HDMI IN HDMI OUT SET SDI IN JOG SDI OUT HyperDeck features outputs for monitoring or connecting to additional recording units. All outputs are active, so you can record and monitor simultaneously. HyperDeck Shuttle INPUT DISP HyperDeck Shuttle HDMI and SDI outputs.
Getting Started Recording Video with HyperDeck Studio Models SSD 2 INPUT DISP Step 1. SET SET REM 01:42:56:12 Insert your formatted SSD into either SSD slot. The slot light will illuminate green as HyperDeck reads the disk. When the slot light goes off, HyperDeck Studio is ready to record. JOG Step 2. Press the INPUT button once while the stop button is illuminated. The Input button will illuminate and you will be able to preview the video source on the LCD before recording.
Getting Started Step 3. To skip to the next clip, press the next clip button on the shuttle controls. SSD 2 DISP Step 4. SSD 2 SET INPUT REM 01:42:56:12 JOG SSD slots on HyperDeck Studio models have rotating LEDs to show the unit is in playback mode. REM 01:42:56:12 Press previous clip once to go to the start of the current clip or press twice to skip back to the start of the previous clip.
Using HyperDeck 10 Using HyperDeck About SSDs Choosing a Fast SSD When working with high data rate video it's important to carefully check the SSD you would like to use. This is because some SSDs can have up to 50% lower write speed than the manufacturer’s claimed speed, so even though the disk specifications claim an SSD is fast enough to handle video, in reality the disk is not fast enough for real time video recording.
Using HyperDeck Preparing SSDs for HyperDeck SSDs used by HyperDeck must be formatted as either HFS+ or exFAT. These disk formats allow long clips to be recorded in single files. HFS+ is also known as Mac OS Extended. It is the recommended format for HyperDeck as it supports "journaling". In the event of a hardware or software malfunction, data on a journaled SSD is more quickly recovered and less likely to be corrupted in the first place. HFS+ is natively supported by Mac OS X.
Using HyperDeck HyperDeck Utility Blackmagic HyperDeck Utility is used to change settings and update the internal software in your HyperDeck. In addition to installing HyperDeck Utility, uncompressed 10 bit codecs are installed for Mac and Windows. The HyperDeck Installer software also installs Blackmagic System Preferences, which allow your favorite video editing software to perform live capture from HyperDeck Studio Pro via Thunderbolt.
OTE 13 Using HyperDeck Selecting Your Video Format in HyperDeck Utility All current HyperDeck models let you select from a choice of uncompressed and compressed video formats. The original HyperDeck Shuttle exclusively records uncompressed video. INPUT DISP SET Selecting your recording and playback format. HyperDeck Studio Pro includes additional ProRes codecs.
Using HyperDeck About Ultra HD 4K With four times as many pixels as full HD 1080p, Ultra HD 4K is the new standard for high resolution video. This means you get 3840 x 2160 pixel resolution, allowing you the greatest creative control for pixel perfect compositing, VFX work, color grading as well as the ability to project onto large displays for digital signage and cinema projections. SD (720x480) HD (1920x1080) Ultra HD 4K (3840x2160) Ultra HD 4K is 4 times the resolution of HD.
Using HyperDeck Accessing Your Clips To access your clips, simply connect the SSD to your computer using an SSD dock. You can either drag the files from the SSD directly to a local hard drive, or you can work directly from the SSD. You can also connect the SSD to your computer with a 2.5" eSATA to USB cable adapter, however this won't be fast enough to handle working directly from the SSD and is really only recommended as a portable solution for getting your video files off the SSD and onto a laptop.
Using HyperDeck HyperDeck Shuttle DISP DISP DISP VIDEO VIDEO VIDEO DISP SSD Indicator When you first switch on HyperDeck Shuttle, or any time you insert an SSD, the SSD indicator will light up while checking the SSD and then switch off. If the SSD has not been formatted correctly, or fails to work, the SSD indicator will illuminate solid red until the SSD is removed. Check if the SSD is formatted correctly and also check that it works with a computer.
Using HyperDeck Selecting Timecode Source When recording from HD-SDI video sources that provide embedded SMPTE RP 188 metadata, you can record the embedded timecode from the video source instead of using timecode generated by your HyperDeck. To set this on HyperDeck Studio models using the Display menu: Step 1. Press the DISP button to bring up the main menu. Step 2. Scroll to the Timecode menu and press SET. Step 3. Press SET to enter the Timecode Source menu and select Input. Step 4.
Using HyperDeck Timecode Run Recording HyperDeck also supports timecode run recording, which is similar to start/stop recording, but is only used if your HD-SDI camera does not support trigger recording via HD-SDI. To set up timecode run recording: Use the HyperDeck Utility to enable Timecode Run recording. Step 1. Go into your camera's timecode settings and change them from "free run timecode" to "record run timecode". Step 2. In HyperDeck Utility, set Trigger recording to "When SDI timecode runs".
OOP OUT INPUT DISP 19 Using HyperDeck SET JOG You can also use the Jog/Shuttle Wheel to shuttle to a particular section at variable speeds. The more you turn it forwards or backwards, the faster your HyperDeck Studio will play through your video. Once you’ve found the section you want to review, press play to resume normal playback.
Using HyperDeck POWER REMOTE Y IN IN A ETHERNET POWER REMOTE Y IN B-Y IN IN IN B-Y OUT IN B R-Y IN IN B IN C IN D STEREO IN PUSH PUSH IN D OUT A OUT B OUT C SD/HD/3G/6G-SDI OUT SD/HD/3G/6G-SDI IN HDMI Remote port on HyperDeck Studio Pro. INPUT MON OUT OUT TIMECODE REM REM 01:42:56:12 JOG JOG Press the REM button on HyperDeck Studio models to enable RS-422 deck control.
Using HyperDeck Supported RS-422 Commands Command Reply No Remote Notes 0x11 DeviceTypeRequest NTSC: 0xF0E0 PAL: 0xF1E0 24P: 0xF2E0 Enabled 0x20 0x00 Stop Acknowledge Disabled 0x20 0x01 Play Acknowledge Disabled 0x20 0x02 Record Acknowledge Disabled 0x20 0x10 FastFwd Acknowledge Disabled 0x21 0x11 JogFwd1 Acknowledge Disabled 0x22 0x11 JogFwd2 Acknowledge Disabled Treated as N=1; Same as JogFwd1 0x21 0x12 VarFwd1 Acknowledge Disabled Uses ShuttleFwd1 0x22 0x
Using HyperDeck Supported RS-422 Commands Command Reply No Remote Notes 0x21 0x38 ProgSpeedPlayPlus Acknowledge Disabled 0x21 0x39 ProgSpeedPlayMinus Acknowledge Disabled 0x20 0x40 Preview Acknowledge Disabled Status bits are set 0x20 0x41 Review Acknowledge Disabled Status bits are set 0x20 0x43 OutpointPreview Acknowledge Disabled 0x22 0x5C DMCSetFwd Acknowledge Disabled 0x22 0x5D DMCSetRev Acknowledge Disabled 0x20 0x60 FullEEOff Acknowledge Disabled 0x20
Using HyperDeck Supported RS-422 Commands Command Reply No Remote Notes 0x40 0x23 AOutReset Acknowledge Disabled 0x44 0x31 PrerollPreset Acknowledge Disabled 0x40 0x40 AutoModeOff Acknowledge Disabled ignored, Status bit remembered 0x40 0x41 AutoModeOn Acknowledge Disabled ignored, Status bit remembered 0x0A TimeCodeGenSense 6 - Sense Request 0x61 Request for Gen TC GenTCData Enabled Timer1Sense Timer1Data Enabled UserBitsVITCTimeSense UserBitsVITCTimeData Enabled L
Using HyperDeck Supported RS-422 Commands Command Reply No Remote Notes 7 - Sense Reply 0x78 0x00 Timer1Data - - Current Time and 00:00:00:00 0x78 0x04 LTCUserBitsTimeData - - Current Time and 00:00:00:00 0x78 0x06 VITCUserBitsTimeData - - Current Time and 00:00:00:00 0x74 0x06 VITCTimeData - - Current Time 0x74 0x07 UserBitsVITCTimeData - - 00:00:00:00 0x74 0x08 GenTCData - - Current Time 0x78 0x08 GenTCUBData - - Current Time and 00:00:00:00 0x74 0x09 Ge
Using HyperDeck RS-422 Developer Information Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Byte 0 0 0 Cassette out 0 0 0 0 Local Byte 1 Standby 0 Stop 0 Rewind Forward Record Play Byte 2 Servo Lock 0 Shuttle Jog Var Direction Still 1 Byte 3 Auto Mode 0 0 0 Aout Set Ain Set Out Set In Set Byte 4 Select EE Full EE 0 0 0 0 0 0 Byte 5 0 0 0 0 0 0 0 0 Byte 6 0 Lamp Still Lamp Fwd Lamp Rev 0 0 0 0 Byte 7 0 0 0 0 0 0 0 0 Byte 8
Using HyperDeck Installing the HyperDeck Shuttle Mounting Plate The contents of the box includes: x1 HyperDeck Shuttle x4 Socket Head Screws Mounting Plate M3 x 10mm You will need: x1 Hex Allen Key 2.5mm (not included) 1 3 1 3 Step 1 2 2 2 4 4 4 HyperDeck Shuttle Mounting Plate is an optional accessory that lets you secure your HyperDeck Shuttle to a camera rig with your choice of rail mounts, cold shoe mounts, articulated arms and more.
Using Your Favorite Editing Software 27 Using Your Favorite Editing Software Capturing video via Thunderbolt When connected to a computer with Thunderbolt technology, HyperDeck Studio Pro can be used as a powerful capture solution for your editing workflow.
Using Your Favorite Editing Software Avid Media Composer Avid Media Composer captures standard and high definition video live from HyperDeck Studio Pro via a Thunderbolt cable. When you install the HyperDeck Software, Blackmagic plug-ins are automatically installed to Media Composer. You can use the INPUT button on HyperDeck Studio Pro to select your video and audio connections including SDI, HDMI and analog. HyperDeck Utility also installs a HyperDeck Studio deck preset to help with RS-422 deck control.
Using Your Favorite Editing Software Capturing live via Thunderbolt To capture video live via Thunderbolt from HyperDeck Studio Pro: Step 1. Choose Tools > Capture to open the Capture Tool. Step 2. Set up the Capture Tool to capture video by clicking the Toggle Source button. Step 3. Set the Video and Audio input menus to "Blackmagic". Step 4. Select the video source track (V) and the audio source tracks (A1, A2, ...) you wish to capture. Step 5.
Using Your Favorite Editing Software Apple Final Cut Pro 7 When you install the HyperDeck Software, Blackmagic Easy Setups are automatically installed to Final Cut Pro 7. Setting up Final Cut Pro 7 Step 1. Launch Final Cut Pro 7 and the Easy Setup window will appear. Step 2. Click on the popup menu and select the desired Blackmagic Easy Setup. For each video format (NTSC, PAL and HDTV) you will find a range of Blackmagic compressed and uncompressed file formats you can choose. Step 3.
Using Your Favorite Editing Software Adobe® Premiere Pro® CC When you install the HyperDeck Software, Blackmagic plug-ins are automatically installed to Adobe Premiere Pro CC. Setting up a Blackmagic Design project Step 1. Launch Premiere Pro. Step 2. Create a New Project and click on the Scratch Disks tab. Step 3. Set the desired Location and Name for your project at the bottom of this window. Step 4. Set the locations for your captured video, captured audio, video previews and audio previews. Step 5.
Using Your Favorite Editing Software Capturing live via Thunderbolt To capture video live via Thunderbolt from HyperDeck Studio Pro: Step 1. Choose: File > Capture [F5] Step 2. Press play on HyperDeck Studio Pro and then Click the red record button [G]. A preview of the video you are capturing will appear. To change the capture format, click on the Settings tab and then the Edit button.
Using Blackmagic Media Express 33 Using Blackmagic Media Express Capturing Video and Audio Files Blackmagic Media Express 3 software is included with every HyperDeck Studio Pro to perform video and audio capture to files. Blackmagic Media Express 3 is a great tool when you don’t need the complexity of NLE software, but simply want to capture video from HyperDeck Studio Pro's Thunderbolt port.
Using Blackmagic Media Express Media List Project name, video format and frame rate Timecode List, Thumbnail and Favorites view Clip Bins Mark In / Mark Out Search Field Grab Still Frame Logging Information VTR / deck timecode Capture options Transport Controls Audio channel enable/disable Video Preview Audio Meters Remote indicator
Using Blackmagic Media Express Capture Capturing video is easy. All you need to do is connect HyperDeck Studio Pro via a Thunderbolt cable, set the Media Express preferences and press the Capture button. Enter a description for your video Step 1. Connect your video source to an input on HyperDeck Studio Pro. Step 2. Check that HyperDeck Studio Pro is set to the input you have connected your source to. e.g. SDI, HDMI or analog. Step 3.
Using Blackmagic Media Express DPX Capture If you want to capture a DPX image sequence rather than a movie file, open the Media Express preferences and set the Capture File Format to DPX 10 Bit RGB. You will need a fast disk array to cope with the uncompressed, 10 Bit RGB format. DPX capture preferences Step 1. Connect your video source to an input on HyperDeck Studio Pro. Step 2. Check that HyperDeck Studio Pro is set to the input you have connected your source to. e.g. SDI, HDMI or analog.
Using Blackmagic Media Express Media List Project name, video format and frame rate Timecode List, Thumbnail and Favorites view Clip Bins Mark In / Mark Out Search Field Clip Information Grab Still Frame VTR / deck timecode Favorites Selection Transport Controls Audio channel enable/disable Video Preview Audio Meters Remote indicator
Using Blackmagic Media Express Playing back Video and Audio Files Importing clips You can play back your video and audio files after importing media into Media Express in any of the following ways: Double-click an empty area of the Media List. Right-click an empty area of the Media List and select Import Clip from the contextual menu. Go to the File menu, select Import and then Media Files. Select the video and audio clip(s) you wish to import from the Open Video Clip dialog box.
Using Blackmagic Media Express Browsing Media In the Media List, choose to view your clips in Timecode List view or Thumbnail view. Click the Favorites button to only show your favorite clips. Type in the Search field to find your favorite clips. In the Media List, you can view your clips in Thumbnail view or Timecode List view by clicking on the desired view button at the top-right of the Media List. Thumbnail view Thumbnails are the most intuitive way to display your clips.
Using Blackmagic Media Express Deleting clips and bins To delete clips, select the unwanted clips and press the forward delete button on your keyboard. This will only delete the clips from the Media List and they will safely remain stored on your disk. To delete bins, right-click within a bin and choose "Delete Bin". This action will delete the bin and any clips it contains. This will only delete the clips from the Media List and they will safely remain stored on your disk.
Using Blackmagic UltraScope 41 Using Blackmagic UltraScope What is Blackmagic UltraScope? With HyperDeck Studio Pro you get the incredible features of Blackmagic UltraScope, which you can even use with compatible Mac OS X and Windows notebook computers with Thunderbolt technology! Blackmagic UltraScope software is installed by the HyperDeck Studio Pro Installer.
Using Blackmagic UltraScope Blackmagic UltraScope Interface 1. Parade Display 4. Histogram Display 5. Error Logging 2. Waveform Display 3. Vectorscope Display 6. Audio Metering Display 7.
Using Blackmagic UltraScope Understanding Blackmagic UltraScope Views Blackmagic UltraScope has two different views available depending on your workflow needs and screen resolution. You have the choice of viewing six displays in “Full Screen” view, or for more compact viewing, choose any 2 displays in “2-up” view. The display view can be selected from the View menu. Choose Full Screen to enter “Full Screen” view. If this option is unchecked, “2-up” view will be displayed.
Using Blackmagic UltraScope Zoom Function Blackmagic UltraScope allows you to zoom in on various displays for a more detailed analysis. This helpful function will also pan and zoom the graticules for each display in high resolution. The zoom function is available in the Parade, Waveform, Vectorscope and Picture displays. To zoom in, simply click on the bottom right of each respective display. Now you will be able to view the display in finer detail.
Using Blackmagic UltraScope Waveform Display The Waveform Display is similar to traditional composite waveform monitors seen in many broadcast studios. On Mac OS X, the Waveform Display always shows the luminance view and the B/W button is permanently selected. On Windows, select B/W for the luminance only view, COMP for the composite only view, and BOTH for the twin luminance and composite view.
Using Blackmagic UltraScope Vectorscope Display The Vectorscope Display uses a vector view to show the colors in a video signal. You can see color bar video levels by using the color boxes in the graticule. All you need to do is select 75% or 100% color bars, depending on the standard of color bar test signals used in your facility! Some people think you can use a vectorscope to check for illegal levels.
Using Blackmagic UltraScope Histogram Display Histogram Display is most familiar to graphic designers and camera operators. Histogram Display shows the distribution of white to black information and lets you monitor how close the detail is to being clipped off in the whites or blacks of the video. Histogram Display also lets you see the effects of gamma changes in the video. Black video is shown on the left of the display, and whites are shown on the right.
Using Blackmagic UltraScope Error Logging Display Error Logging records errors in video and audio and is indispensable when reviewing video and for unattended operation. Errors may be logged for color, brightness or audio threshold levels as well as loss of video signal, change of video format or audio silence. After setting the parameters which define when an error should be logged, you can choose to start or stop error logging, save the log to a file, or clear the log.
Using Blackmagic UltraScope How to Customize Error Logging To customize error logging, go to the Error Logging menu and choose Profiles to open the Error Logging Profiles window. Saved profiles appear in the profile list at the left and the current active profile appears in bold above the list. The standard EBU-R103 profile cannot be deleted or modified and is grayed out. You can add a profile by clicking the add (+) button and typing a name for your profile.
Using Blackmagic UltraScope Audio Metering Display Audio Metering Display shows you the audio levels in the embedded audio of the HyperDeck Studio Pro's video signal. 8 channels of embedded audio from your HyperDeck Studio Pro are de-embedded and then displayed in either dBFS or VU format. The VU button switches between dBFS and VU audio metering standards. dBFS is essentially a meter of the overall digital audio signal and is common on modern digital equipment.
Using Blackmagic UltraScope Picture Display The Picture Display is a handy confidence monitor so you can see the video that is being received by Blackmagic UltraScope. The Picture Display has three settings: COLOR, B/W (black & white) and BLUE (Blue Only). Set to COLOR or B/W depending on the needs of your facility.
Using Blackmagic Disk Speed Test 52 Using Blackmagic Disk Speed Test Using Blackmagic Design Disk Speed Test Blackmagic Disk Speed Test is a beautiful and fun to use application that measures the read and write performance of storage media in video frame sizes. The use of video frame sizes provides accurate measurement of how the disk storage will perform with video related applications.
Using Blackmagic Disk Speed Test Settings Click this button to access the settings before running a disk speed test START Click this button once to start the disk speed test.
Using Blackmagic Disk Speed Test Start Once you have chosen the desired settings, click the Start button to commence the disk speed test. Disk Speed Test will write a temporary file to the selected target drive. When the file has finished writing, or when 8 seconds has elapsed, Disk Speed Test will stop writing and start reading back the temporary file from the drive.
Developer Information 55 Developer Information Blackmagic HyperDeck Ethernet Protocol Version 1.3 The Blackmagic HyperDeck Ethernet Protocol is a text based protocol accessed by connecting to TCP port 9993 on a HyperDeck Studio or HyperDeck Studio Pro. If you are a software developer you can use the protocol to construct devices that integrate with our products.
Developer Information Command Command Description goto: timeline: {“start”, “end”} Goes to start of first clip or end of last clip. goto: timecode: {timecode} Goes to specified timecode goto: timecode: {“+”, “-”} {duration in timecode} Moves forward or back a duration in timecode commands Lists all supported commands in an XML format. notify Queries the current state of all notifications. notify: transport: true Enables transport notifications.
Developer Information Command Combinations You can combine the parameters into a single command, for example: play: speed: 200 loop: true single clip: true Or for configuration: configuration: video input: SDI audio input: XLR Or to switch to the second disk, but only play NTSC clips: slot select: slot id: 2 video format: NTSC Using XML While you can use the Terminal to talk to HyperDeck, if you are writing software you can use XML to confirm the existence of a specific command based on the firmware of t
Developer Information Response syntax Simple responses from the server consist of a three digit response code and descriptive text terminated by a new line: {Response code} {Response text}↵ If a response carries parameters, the response text is terminated with a colon, and parameter name and value pairs follow on subsequent lines until a blank line is returned: {Response code} {Response text}:↵ {Parameter}: {Value}↵ {Parameter}: {Value}↵ ...
Developer Information 111 remote control disabled 120 connection rejected 150 invalid state Asynchronous response codes The server may return asynchronous messages at any time.
Developer Information The current remote control state may be overridden allowing remote access over ethernet irrespective of the current remote control state: remote: override: {"true", "false"} ↵ The override state is only valid for the currently connected ethernet client and only while the connection remains open.
Developer Information The server will respond with a list of all supported commands: 201 help:↵ {Help Text}↵ {Help Text}↵ ↵ Switching to preview mode The "preview" command instructs the deck to switch between preview mode and output mode: preview: enable: {"true", "false"}↵ Playback will be stopped when the deck is switched to preview mode. Capturing will be stopped when the deck is switched to output mode.
Developer Information If loop mode is set, the playback loop will be between: the "start" position and the end of timeline for play forward, the "start" position and the start of timeline for play backward. By default the deck will continue playing until the end of the timeline.
Developer Information To go to the start or end of the current clip: goto: clip: {"start", "end"}↵ To go to the start of the first clip or the end of the last clip: goto: timeline: {"start", "end"}↵ To go to a specified timecode: goto: timecode: {timecode}↵ To move forward or back a specified duration in timecode: goto: timecode: {"+", "-"}{duration in timecode}↵ Note that only one parameter/value pair is allowed for each goto command.
Developer Information To enable or disable configuration notifications: notify: configuration: {"true", "false"}↵ Multiple parameters may be specified.
Developer Information recording time: {recording time available in seconds}↵ video format: {disk's default video format}↵ ↵ Asynchronous slot information change notification is disabled by default and may be configured with the "notify" command. When enabled, changes in slot state will generate a "502 slot info:" asynchronous message with the same parameters as the "202 slot info:" message.
Developer Information Retrieving timeline information The "clips get" command returns information for each available clip, for a given range in timecode, on the current timeline. Without parameters, the command returns information for all clips on timeline: clips get↵ If parameters "in: timecode" and "out: timecode" are specified, the command returns information for clips within the specified range. If "out: " is not specified, it only returns the information of the clip containing in "in: " point.
Developer Information clip id: {Clip ID or "none"}↵ video format: {Video format}↵ loop: {"true", "false"}↵ ↵ The "timecode" value is the timecode within the current timeline for playback or the clip for record. The "display timecode" is the timecode displayed on the front of the deck. The two timecodes will differ in some deck modes. Asynchronous transport information change notification is disabled by default and may be configured with the "notify" command.
Developer Information Querying and updating configuration information The "configuration" command may be used to query the current configuration of the deck: configuration↵ The server returns the configuration of the deck: 211 configuration:↵ audio input: {"embedded", "XLR", "RCA"}↵ video input: {"SDI", "HDMI", "component"}↵ file format: {File format}↵ ↵ One or more configuration parameters may be specified to change the configuration of the deck.
Developer Information To switch to a specified slot: slot select: slot id: {slot ID}↵ To select the output video format: slot select: video format: {video format}↵ Either or all slot select parameters may be specified. Note that selecting video format will result in a rescan of the disk to reconstruct the timeline with all clips of the specified video format.
Help 70 Help Getting Help The fastest way to obtain help is to go to the Blackmagic Design online support pages and check the latest support material available for your HyperDeck. Blackmagic Design Online Support Pages The latest manual, software and support notes can be found at the Blackmagic Design support center at www.blackmagicdesign.com/support.
Warnings 71 Warnings Caution: Risk of Electric Shock On HyperDeck Studio Pro's rear panel you will see a yellow warning label marked ‘Caution: Risk of Electric Shock’. This is intended to warn users that there may be the presence of uninsulated “dangerous” voltage within HyperDeck Studio Pro’s enclosure which may be of sufficient magnitude to constitute a risk of electric shock to the user.
Warranty 72 Warranty 12 Month Limited Warranty Blackmagic Design warrants that this product will be free from defects in materials and workmanship for a period of 12 months from the date of purchase. If a product proves to be defective during this warranty period, Blackmagic Design, at its option, either will repair the defective product without charge for parts and labor, or will provide a replacement in exchange for the defective product.
