Instruction manual

Mini Converter Audio to SDI
25
Switch 5 - Audio Group Bit 0
See switch 6 description.
Switch 4 - CH 4 or AES 7&8 Embed or Disable
Once you have selected your audio channels, use switches 4, 3, 2 and 1 to select which channels to disable
or embed. The disable setting lets you avoid overwriting audio channels you wish to keep in the SDI signal.
For example, you can disable analog audio channel 1 or AES/EBU channels 1 and 2 by setting switch 1 to
the ON position. Alternatively, you can embed the audio channels by setting switch 1 to the OFF position.
Audio Selection Tables
Mini Switch Settings Example: Try experimenting with the mini switches. Select analog audio channels 1
to 4 by setting switches 8, 6 and 5 to the OFF position.
Embed analog audio channels 1 to 4 by setting switches 8, 6, 5, 4, 3, 2 and 1 to the OFF position.
Blackmagic Converter Utility Settings
The Converter Utility software complements your mini switch settings by providing additional adjustment
options.
The Audio Levels pane lets you adjust audio levels for the selected analog channels or AES/EBU audio
reference levels.
Adjust audio levels for the selected analog channels or AES/EBU
audio reference levels using Blackmagic Converter Utility.
Switch Setting Audio Channels
4 ON Disable analog CH 4, AES/EBU CH 7 and 8
OFF Embed analog CH 4, AES/EBU CH 7 and 8
3 ON Disable analog CH 3, AES/EBU CH 5 and 6
OFF Embed analog CH 3, AES/EBU CH 5 and 6
2 ON Disable analog CH 2, AES/EBU CH 3 and 4
OFF Embed analog CH 2, AES/EBU CH 3 and 4
1 ON Disable analog CH 1, AES/EBU CH 1 and 2
OFF Embed analog CH 1, AES/EBU CH 1 and 2