Specifications

Camera Video Output
28
Using Blackmagic UltraScope
What is Blackmagic UltraScope?
Blackmagic UltraScope software provides waveform monitoring of the video output from your Cinema
Camera or Production Camera 4K. You can plug your camera into any compatible Mac OS X and Windows
notebook computer via Thunderbolt technology!
Previously, broadcast quality television and post production scopes were incredibly expensive and bulky
solutions that only let you see one scope at a time on a tiny screen! Some scopes look ugly and don’t really
look good in front of your client. With Blackmagic UltraScope, you get 6 wonderful scopes that let you
monitor all aspects of your video signal, which is perfect for checking levels on your camera while shooting.
Any adjustments made to the camera can immediately be seen with Blackmagic UltraScope!
Simply connect a Thunderbolt cable from your camera to a Thunderbolt port on your computer and away
you go!
Installation Requirements
The Blackmagic UltraScope software interface requires a computer display with a minimum resolution of
1280 x 800 pixels to view two scopes simultaneously. Blackmagic Design recommends viewing all 6 scopes
simultaneously by using a computer display resolution of 1920 x 1200 or 1920 x 1080 pixels.
Please see the support pages at www.blackmagicdesign.com for a comprehensive list of the latest minimum
system requirements for Blackmagic UltraScope.
Blackmagic UltraScope