Specifications

Settings
25
Image Stabilizer
Pocket Cinema Camera, Cinema Camera EF and Production Camera 4K support the image stabilizer (IS)
feature found in many active lenses. Simply set the Stabilizer switch to ON to use it with your camera. If your
lens also features a Stabilizer Mode switch, set it to the appropriate mode for still shots or for movement.
When using battery power, the camera will only activate the image stabilizer while recording, as the lens
draws additional power from the camera to operate the image stabilizer. When external power is connected
to the camera, the image stabilizer will be active any time you set the lens' stabilizer switch to ON.
Status Strip
Your chosen settings are always displayed on a status strip, which runs the length of the LCD, showing a
convenient summary of the camera's current settings.
Battery Life Indicator
When the remaining charge drops below 25% capacity, the status strip will show the battery status in red to
warn you that battery life is running low.
SD/SSD Activity Icons
The status strip displays important information showing the state of the inserted media.
Moving Dots When you see the moving dots, the camera is checking and preparing the media.
No SD/SSD This means no media is detected or present in the camera.
Ready Ready to Record.
Rec Recording.
Rec flashing Dropped Frames were detected.
Disk Full Flashes when SD card or SSD is almost full.
Playback mode Shows play, fast forward and reverse icons.
Time During capture, this shows the duration of the current shot. When playing back
clips from an SD card or SSD, this shows the time of the clip.
1 2 3 4
6
5 8 97
1. Recording Format
2. F-Stop
3. Frame Rate
4. SD/SSD Status
5. Timecode
6. ISO Setting
7. Shutter Angle
8. White Balance
9. Battery Life Indicator