Specifications

Connections
16
Blackmagic Cinema Camera and Production Camera 4K
LANC Remote Control
The remote port on your camera can be used to remotely control record starting and stopping,
iris adjustments and manual focus adjustments when using a compatible lens.
The port is a 2.5 mm stereo jack which uses the standard LANC protocol.
Headphones
Monitor your audio while recording or playing back clips by plugging your headphones into the 3.5mm
stereo headphones jack.
Audio In
The 1/4 inch TRS Phone audio connectors accept microphone or line level audio. It's important to select the
appropriate setting or your audio may sound too quiet or too loud. The camera will automatically switch to
line level if the audio is too loud for a sustained period.
SDI Out
Blackmagic Cinema Camera supports 3G-SDI so it can be used to output uncompressed 10-bit 4:2:2 video
to routers, monitors, SDI capture devices, broadcast switchers and any other SDI devices.
Production Camera 4K supports 6G-SDI, so it can be used to connect to any SDI monitor as well as 4K
switchers such as ATEM Production Studio 4K.
Thunderbolt
When connected to a Mac OS X or Windows computer with Thunderbolt technology, your Cinema
Camera or Production Camera 4K can be used as a powerful solution for waveform monitoring and color
correction. Regardless of which recording format you choose on the camera, the Thunderbolt port always
outputs HD1080p video in the uncompressed 10-bit format, which is compatible with a wide range of
popular video software.
Power
Use the 12 – 30V DC input for connecting your power supply and to charge the internal battery.
USB
Use the USB port to connect your Blackmagic Cinema Camera or Production Camera 4K to your computer
and update the internal software. Open the SSD door to access the USB port.