User's Manual

Connecting Blackmagic MultiView 16 to Videohub Control Software
It’s easy to connect Blackmagic MultiView 16 to your Videohub software:
1 Ensure Blackmagic MultiView 16 has the latest internal software installed and you are
running the latest version of Videohub Control. You can download the latest updates
from the Blackmagic Design support center at: www.blackmagicdesign.com/support
2 Power your Blackmagic MultiView 16.
3 Plug Blackmagic MultiView 16 into your computer via Ethernet.
4 Launch Blackmagic Videohub Control.
5 Click on the ‘select a Videohub’ button on the Videohub Control home page and select
your Blackmagic MultiView 16 from the list.
Controlling your Blackmagic MultiView 16 using Videohub Control software is an easy and
convenient way to change sources and views, and arrange your view displays remotely, while
monitoring multiple inputs at the highest video resolution available.
If you can’t see your Blackmagic MultiView 16 in the list of Videohubs available, you may need
to configure the IP address for your network.
For more information, refer to ‘Configuring Network Settings on Blackmagic MultiView
16’ below.
Configuring Network Settings on Blackmagic MultiView 16
Use Blackmagic MultiView 16’s integrated control panel and LCD to set the IP address and
network settings. Once these settings are set correctly, your Blackmagic MultiView 16 will be
visible to other computers and hardware panels. These devices can then control the unit
remotely and make routing changes.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
SOLO
SET
SRC
VIEW
MENU
Blackmagic MultiView 16
ETHERNET SD/HD/3G/6G-SDI IN
REF IN
LOOP OUT
IN
HDMI OUT 6G-SDI OUT HD-SDI OUT
RS-422
CNTRL
USB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
SOLO
SET
SRC
VIEW
MENU
Blackmagic MultiView 16
ETHERNET SD/HD/3G/6G-SDI IN
REF IN
LOOP OUT
IN
HDMI OUT 6G-SDI OUT HD-SDI OUT
RS-422
CNTRL
USB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Connect to Blackmagic Videohub Control software by clicking on the ‘select a
Videohub’ button, then select your Blackmagic MultiView 16 from the list.
74Blackmagic Videohub Software