User's Manual

You will need to reconfigure your GPI and
Tally Interface to work with Videohub.
GPI and Tally Interface connected via USB.
If you do not know the IP address of your Videohub:
1 Connect the Videohub to your computer via USB.
2 Launch the Videohub software and click on Videohub Server Preferences.
3 Note down the IP address in the Remote Videohub IP address field.
Enter a GPI and Tally Name and the IP address
of the Videohub you want to connect to.
Controlling Blackmagic MultiView 16 with
Videohub Software
Blackmagic MultiView 16 can be controlled using Videohub Control software. Blackmagic
Multiview 16 is a single rack SDI monitoring solution capable of simultaneously displaying up to
16 Ultra HD, HD and SD SDI signals in a variety of formats on a single monitor. With Videohub
Control you get the ability to route Blackmagic MultiView 16’s multi view sources and views, and
arrange them on a display the way you want, so is the perfect monitoring choice for your
Videohub router workflow.
Up to 16 video signals can be displayed using the maximum 4x4 grid, or you can select 3x3,
2x2, or view each input in full screen mode by selecting solo. When connected to an
Ultra HD monitor, Blackmagic MultiView 16 can even display four HD signals in their native
1080 HD resolution.
73Blackmagic Videohub Software