User's Manual

Naming your Videohub
Give your Videohub a unique name to make it easy to identify when controlling it over
a network.
1 Click on the ‘configure’ tab and then click in the ‘name’ text field.
2 Enter your Videohub’s name and use things such as location or owner to make it easy
for users to recognize and then click the ‘save’ button to close the window.
Name your Videohub so it’s easy for network users to identify.
Updating your Videohub’s Internal Software
Occasionally, the internal software in your Videohub will need to be updated. Updates to
internal software can provide new features, compatibility with new hardware and support for
new formats.
Please follow these steps to update your Videohub’s internal software:
1 Connect your computer to the Videohub’s USB 2.0 connector.
2 Launch Blackmagic Videohub Setup and it will automatically display any Videohubs that
are connected to your network.
3 Select your Videohub by clicking on either the picture or the configuration icon.
4 The utility will inform you if an update is required.
5 If an update is required, click the Update button and allow the software to install. Make
sure not to unplug the Videohub while the update is in progress.
6 Click the Close button when the update is finished.
Do not unplug the Videohub while the update is in progress.
50Blackmagic Videohub Software