User's Manual

Blackmagic Videohub Setup
Customizing Labels
Blackmagic Videohub Setup is also used to enter labels. Note that port labels on an
IPVideohub cannot be edited through this utility, as these labels come from the connected
IPVideo devices. The labels are stored on the connected Videohub and are also visible on
theother control panels connected to your network.
Customize Input Labels
1 Click on the ‘inputs’ tab and then click on the first input that you wish to label.
2 Enter label names for your inputs and click the ‘save’ button to close the window.
For larger Videohubs, use the ‘jump to’ dropdown menu to quickly jump to a different range
of inputs.
Customize Output Labels
1 Click on the ‘outputs’ tab and then click on the first output that you wish to label.
2 Enter label names for your outputs and click the ‘save’ button to close the window.
Customize Remote Labels and Port Directions
1 Click on the ‘remotes’ tab and then click on the first remote that you wish to label.
2 Enter the label name and then click on the Port Direction icon and select from Auto,
In or Out.
3 When you have finished labeling all your remotes click the ‘save’ button to close
the window.
48Blackmagic Videohub Software