User's Manual

HD video output format
This information is located in the upper left corner and displays the 1080i59.94 or 1080i50 HD
format setting via the HD-SDI outputs.
Audio input
This information is located next to the HD-SDI video output format and displays which SDI input
is being used to embed audio into the HDMI and SDI multi view output signals.
Multiview layout
This displays the arrangement of your views. You can optimize the display depending on the
number of inputs connected.
The home screen is the default display on the control panel
LCD. If you have adjusted a setting,you can always return
to the home screen by pressing the ‘menu’ button.
Menu Buttons Explained
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
SOLO
SET
SRC
VIEW
MENU
Blackmagic MultiView 16
ETHERNET SD/HD/3G/6G-SDI IN
REF IN
LOOP OUT
IN
HDMI OUT 6G-SDI OUT HD-SDI OUT
RS-422
CNTRL
USB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
SRC and VIEW
Use the ‘src’ and ‘view’ buttons to open the ‘source’ and ‘view’ settings. These
buttons let you select which input source you want to display on a desired view.
1 Press the ‘view’ button to open the view screen. The view section on the
lower half of the LCD will be active.
2 Press a numbered button on the control panel to select your desired view, or
alternatively you can use the rotary knob to scroll through the views. Confirm
your setting by pressing the ‘set’ button.
3 Press the src button. The source section on the upper half of the LCD will
become active.
4 Press a numbered button on the control panel to select your desired input,
or alternatively you can use the rotary knob to scroll through your inputs
on the LCD. If you have customized your input labels, they will be displayed
accordingly in the upper half of the LCD.
5 Press the ‘set’ button to confirm the setting.
SOLO
You can monitor a view in fullscreen mode by pressing the ‘solo’ button. With solo
enabled, press the number buttons on the control panel to select which view to
monitor, or you can use the rotary knob to scroll through your views. Press ‘solo’
again to return to the multi view layout.
44Videohub Router Monitoring