User's Manual

3 Use a number 02 size Pozidriv screwdriver to secure the power card with its two
screws. If you have a second power card, install it now into the spare power card slot.
4 Connect the power cable from the power card to the power supply. Tighten the thumb
screws on both power connectors. Repeat this step if you have a second power card
and second power supply. It does not matter which power card connects to which
power supply.
5 Connect an IEC cord from each power supply to a mains wall socket and turn on
the power.
Congratulations! Your Universal Videohub 288 is now ready to start routing video!
Installing a Universal
Videohub SDI
Interface Card.
MAIN POWER
+12V 800W
The Universal
Videohub
Power Supply consists
of a power card which
is inserted into the
Universal Videohub
288 and then
connected to a 1 RU
chassis located under
the Universal
Videohub 288.
31Universal Videohub Routers