User's Manual

How to select devices by typing the Videohub port numbers
If you’ve chosen to keep the default labels for all Videohub SDI and remote ports, you can
simply type the port numbers to make a routing change. This method is fast but requires that
you remember port numbers or have devised a system for knowing what equipment is
connected to each Videohub port.
1 Press the DEST button. The destination field will be highlighted blue on the LCD.
2 If your Videohub router has RS-422 remote control, press the LEVEL button until you
have set the appropriate routing level for your equipment. Otherwise you can skip
this step.
3 Type in the destination port number using the numeric pushbuttons. Each button will
flash gold once as you press it. The destination will be displayed on the LCD. If you
make a mistake, press the white CLEAR button and retype the port number.
4 Press the SRC button. The source field will be highlighted blue on the LCD.
5 Type in the source port number using the numeric pushbuttons. Each button will flash
white once as you press it. The source will be displayed on the LCD. If you make a
mistake, press the white CLEAR button and retype the port number.
6 The TAKE button will flash red, awaiting your confirmation of the route change. Press
TAKE and the route will change immediately. Otherwise, press CLEAR and no route
change will take place. Videohub Master Control returns to its idle state with the latest
route displayed on the LCD.
If you’ve chosen to keep the default labels for all Videohub SDI and remote
ports, you can simply type the port numbers to make a routing change.
In this example, press DEST and then type the port number 88. Then press
SRC and type the port number 52. Press TAKE to confirm the route change.
How to select devices with the scroll wheel
Regardless of whether or not you’ve customized the Videohub port labels, you can always use
the scroll wheel to browse through a list of sources and destinations. This is the slowest method
but is useful if you want to see the list of all available equipment and ports.
1 Press the DEST button. The destination field will be highlighted blue on the LCD.
2 If your Videohub router has RS-422 remote control, press the LEVEL button until you
have set the appropriate routing level for your equipment. Otherwise you can skip
this step.
3 Scroll the wheel forwards or backwards until the desired destination is found.
Thedestination will be displayed on the LCD.
4 Press the SRC button so it lights white. The source field will be highlighted blue
on the LCD.
5 Scroll the wheel until the desired source is found. The source will be displayed
on the LCD.
19Videohub Hardware Control Panels