User's Manual

Configuring Network Settings with a Built In Control Panel
You can use Smart Videohub models’ built in control panel and LCD to configure network
settings. Your router will be visible to other computers and hardware panels and these
devices can then control the unit remotely and make the routing changes. If your router does
not have a front panel control, then you should use Blackmagic Videohub Setup to configure
your Videohub’s network settings. Refer to the ‘Blackmagic Videohub Setup’ section for
more information.
To set the IP address using the front control panel:
1 Press the ‘menu’ button to open the ‘settings’ menu.
2 Use the rotary knob to scroll down to ‘network’ settings. The ‘take’ button will flash.
Press the ‘take’ button to confirm the selection.
3 Rotate the knob to select the entry you want to change and press ‘take’ to confirm.
4 Use the rotary knob to change a number field. Press the ‘take’ button to confirm the
change and move through the fields.
5 Make sure you confirm the last change by pressing the ‘take’ button. You will know your
settings are confirmed when the field entries are no longer highlighted.
6 Press the ‘menu’ button to exit the settings menu and return to your source and
destination status.
If required, the subnet and gateway address can be set by the same method.
Press MENU to enter the network page and use the
TAKE button and rotary knob to set the IP address.
Smart Videohub Control Panel
Using the Smart Videohub Control Panel and LCD
Smart Videohub routers include Blackmagic Smart Videohub 12x12, 20x20 and 40x40, plus
Smart Videohub CleanSwitch 12x12. These models feature a built in control panel and LCD.
Routing changes can be made without a computer by pressing the numbered pushbuttons on
the front control panel. Remote router control can also be used.
SRC
MENU
DEST
VIDEO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
CLEAR
TAKE
REF IN
ETHERNET
RS-422
CNTRL
REF OUT
USB
SD/HD/3G/6G-SDI OUTSD/HD/3G/6G-SDI IN
Smart Videohub 40 x 40
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Menu buttons on Smart Videohub 40x40
10Smart Videohub Control Panel