User's Manual

When selecting 'factory reset' you will be prompted to confirm your action
Hardware ID
The ‘Hardware ID’ indicator displays an 8 character identifier for your URSA Broadcast. This is
unique to each camera. A longer, 32 character version of this ID is also included in the metadata
for RAW and ProRes video. This can be useful for identifying which footage came from a
particular camera if filenames are changed as the camera hardware ID remains constant.
Software
Displays the current software version installed on your URSA Broadcast. See the ‘Blackmagic
Camera Setup Utility’ section for more information on updating software.
Playback
This setting allows you to select whether to play back a 'Single Clip' or 'All Clips' during
playback. 'All Clips' will play back through all matching media sequentially, and 'Single Clip' will
play one clip at a time. This also applies for the loop function. Selecting loop on 'All Clips' will
play through all of the clips on the CFast 2.0 or SD card and then loop. Selecting 'Single Clip'
will loop one clip at a time.
Setup Settings Page 5
The fifth page of your URSA Broadcast's 'setup' tab contains the following settings.
The camera Bluetooth name will be the letter of your camera as selected in the
slate, followed by the 8 character hardware ID for your URSA Broadcast
91Settings