User's Manual

To plug in external power:
1 Connect the AC to 12V DC adapter plug to your mains power socket.
2 Connect the AC to 12V DC adapter’s 4 pin XLR connector to the 12-20V DC power
connector on the camera.
If you have both external and battery power connected, only external power will be used. If you
remove external power while a charged battery is connected, your camera will switch to battery
power without interruption.
Use the supplied AC to 12V DC adapter to power your Blackmagic URSA Broadcast
You can use industry standard third party external batteries such as V mount or Gold Mount
batteries with your URSA Broadcast. Refer to the ‘mounting batteries' section for more
information about mounting the different types of battery plates to support different batteries.
To turn on URSA Broadcast:
1 Move the power switch, located above the fold out LCD, to the 'on' position.
2 To turn the camera off, move the switch to the 'off' position.
You are now ready to insert CFast 2.0 cards and start recording!
Move the power switch to 'on' to power your camera
AUDIO IN
1
AUDIO IN
2
SDI OUT
12V OUT
SDI OUT
SDI IN
1
2
V
REF IN
TC IN
AUDIO IN
1
AUDIO IN
2
SDI OUT
12V OUT
SDI OUT
SDI IN
1
2
V
REF IN
TC IN
ISO/GAIN SHUTTER WHITE BAL
XLR1
ON OFF
XLR2
SD
CFAST
USB
MIC
LINE
AES
OFF
48V
POWER
FOCUS PEAK PGM MENU
REC
ISO/GAIN SHUTTER WHITE BAL
XLR1
ON OFF
XLR2
SD
CFAST
USB
MIC
LINE
AES
OFF
48V
POWER
FOCUS PEAK PGM MENU
REC
88Getting Started