User's Manual

ND
FILTER
AUTO
W/B
LENS
SDI OUT
12V OUT
0
.50
0.10
5 6
ND
FILTER
AUTO
W/B
LENS
SDI OUT
12V OUT
0
.10
Add or remove shims to slightly change the depth
of your mount. It is a good idea to start with a
small shim thickness such as a 0.10mm.
Place your lens mount onto the camera body,
tighten screws and remount your lens and
check if your lens focus marks are now in
alignment with the focal distance. If not then
continue steps 1 to 6, adjusting shimming a
small amount at a time until your lens is hitting
hits marks.
178
Shimming Lens Mounts