User's Manual

Mounting and Connecting toBlackmagic URSA Broadcast
When using the Blackmagic URSA Studio Viewfinder with Blackmagic URSA Broadcast, you
have the option of mounting the unit to the camera in a number of ways.
You can mount the Blackmagic URSA Studio Viewfinder directly to the top of Blackmagic
URSABroadcast via the supplied V-lock mount plate which can be easily removed from the top
handle mount.
Unscrew the V-lock plate from the URSA Mini handle mount using a 3/16 Hex key, and then
attach it to the top of the camera with the supplied 1/4” screws. As this will make the centre of
gravity on the camera much higher. We recommend doing this while the camera is attached to
atripod for stability.
If you are mounting the Blackmagic URSA Studio Viewfinder to your URSA Broadcast whilst
using the URSA Mini shoulder mount kit, you need to attach it using the supplied URSA Mini
handle mount. Attach the supplied URSA Mini handle mount to the top handle with three of the
supplied 1/4” screws using a 3/16 Hex key. Slide the Studio Viewfinder’s V-lock into the V-lock
plate slot until it clicks in securely.
See the ‘URSA Mini Shoulder Mount Kit’ section in this manual for more information.
F1
F2
CH1/3
IRIS
FOCUS
PGM
REC
HFR
ISO/GAIN
H PHONE
MONITOR
IRIS
SHUTTER
WHITE BAL
CLEAR
2 STOPS
4 STOPS
6 STOPS
CH 1/2
CH 3/4
LOCK
STIL L
HOLD
RESE T
TIME CODE BRIGHT
ND
FILTER
AUTO
W/B
1
2
3
4
ND
LOCK
121Blackmagic URSA Studio Viewfinder