User's Manual

If you are using a lens that does not provide this information, or you want to enter additional
data, you can tap the pencil icon in this setting to enter the information manually. This will bring
up the ‘lens data’ menu, which contains the following information:
The lens data menu showing information automatically populated from a B4
broadcast lens with 12-pin Hirose connector plugged into URSA Broadcast.
 Lens Type
Shows the lens model. If your lens type is not automatically shown here, you can tap
this setting to enter the data manually.
Use the touch keyboard to enter lens data if it is not provided automatically
 Iris
Shows the iris aperture setting at the start of your clip. This information can be
displayed in f- or T-stops depending on the lens used, if supplied automatically. Tap this
setting to enter data manually.
 Focal length
Shows the focal length setting of the lens at the start of the recorded clip. When
automatically supplied, this is shown in millimeters. Tap this setting to enter data manually.
 Distance
Shows the focus distance settings of the lens for the recorded clip. Some lenses can
provide this data automatically and it will be provided in millimeters. You can also enter
this data manually.
 Filter
Shows the current lens filters used. Tap this setting to enter data manually. You can
make multiple entries separated by commas.
102Entering Metadata