User's Manual

USB
키보드
&
마우스 연결하기
10
설치를 완료하려면
Finish
를
Smart Remote 4
를 재시작하려면
Yes
를 선택하세요
.
Smart Remote 4
가 다시 시작되고 최신 버전의
Ultimatte Smart Remote 4
컨트롤 패널이
실행됩니다
.
USB
키보드
&
마우스 연결하기
키보드와 마우스를 사용해
Ultimatte Smart Remote 4
를 제어하려면 뒷면 패널에 있는
USB
포트에 연결하면 됩니다
. Smart Remote 4
가 자동으로 키보드와 마우스를 플러그앤플레이
장치로 감지하여
Windows PC
를 사용하는 것과 같은 방식으로
Smart Remote 4
를 제어할 수
있습니다
.
Developer Information
Controlling Ultimatte using Telnet
The Blackmagic Ultimatte 12 Ethernet Protocol gives you the freedom to build your own custom
control solutions for your Ultimatte 12. For example, you can create your own software
application and control your Ultimatte 12 via Ethernet from your computer.
The first step is to connect your Ultimatte to your computer via Ethernet. You can do this by
connecting Ultimatte to the same network your computer is connected to, or you can connect
Ultimatte directly to your computer.
NOTE If Ultimatte 12 is connected directly to your computer, set your computer to a
manual static IP address. Set the first three blocks of numbers in the IP address
tomatch your Ultimatte 12 and set the subnet mask to 255.255.255.0. You can leave
thegateway or router setting blank as it will not be used in a direct connection between
your computer and Ultimatte 12.
467