User's Manual

Mix Transition Parameters
Rate The mix transition rate in seconds : frames.
Press the ‘mix’ button and set the transition
rate using the LCD menu and control knob
Dip Transitions
A DIP is similar to a mix in that it is a gradual transition that transitions from one source to
another. However, a dip transition gradually mixes through a third source, the dip source.
Forexample, the dip transition can be used for a transition that calls for a white flash or a
transition that quickly flashes the sponsor logo. The length of the dip transition and the dip
source can both be customized.
Program output for a dip transition.
Dip Transition Settings
To perform a dip transition on the software control panel:
1 On the preview bus, select the video source that you want on the program output.
2 Select the DIP transition style in the transition control block.
3 Expand the transition palette and select dip from the transition types bar.
4 Adjust the dip rate by entering a number in the rate window. The rate display in the
transition control block will update.
5 Select the dip source.
6 Perform the transition as an auto transition or manual transition from the transition
control block.
121Operating your ATEM Switcher