User's Manual

Understanding the ATEM Switcher
The ATEM switcher provides all the video processing as well as all video input and output
connectors, connection for control panels and power connections. You use the switcher by
connecting and using various types of control panels. This allows the switcher to be located
remotely, such as in machine rooms where its closer to the connected video devices, while
the control panel can be placed in a location from where it is easier to run production.
ATEM Constellation 8K is a switcher capable of switching up to 40 external Ultra HD inputs via
independent 12G-SDI connectors, or 10 8K inputs via quad link 12G-SDI. This switcher features
six 8K outputs plus an 8K multi view output, or 4 Ultra HD multi views. You can switch video
from HD 1080p59.94, Ultra HD 2160p59.94, all the way up to 8K 4320p59.94. The built in
control panel with LCD and talkback lets you switch directly from the front panel so you can
quickly confirm all your sources and test your production setup before going to air.
ATEM Constellation 8K
ATEM Production Studio 4K supports SD, HD and Ultra HD video and is capable of switching 8
external inputs from its SDI and HDMI connectors. The front panel keypad lets you select
instantly between auxiliary output sources and the small LCD gives you instant feedback on
the status of the auxiliary output.
ATEM Production Studio 4K
ATEM 1 M/E Production Studio 4K supports SD, HD and Ultra HD video and is capable of
switching 10 external inputs from its SDI and HDMI connectors. Input 1 is selectable between
the HDMI Input 1 and SDI Input 1 connector. The front panel keypad lets you select instantly
between 3 auxiliary output sources and the small LCD gives you instant feedback on the status
of the auxiliary outputs.
ATEM 1 M/E Production Studio 4K
9Getting Started