User's Manual

Channel Status
The channel status at the top of each camera controller displays the camera label, On Air
indicator and lock button. Press the lock button to lock all the controls for a specific camera.
When on air, the channel status illuminates red and displays the On Air alert.
Camera Settings
The camera settings button near the bottom left of the master wheel lets you turn on the color
bars feature in Blackmagic Studio Cameras, Micro Studio Cameras and URSA mini, plus adjust
detail settings for each camera’s picture signal.
Each camera controller displays the channel
status so you know which camera is on air.
Use the color wheels to adjust each YRGB
channel’s lift, gamma and gain settings.
Show/Hide Color Bars
Blackmagic cameras have a color bars feature built in which you can turn on or off by
selecting ‘show’ or ‘hide’ color bars. This feature can be very useful for visually
identifying individual cameras while setting up for your live production. Color bars also
provide an audio tone so you can easily check and set the audio levels from
each camera.
The camera settings button lets you turn
color bars on or off and adjust the in-camera
sharpening of connected Blackmagic cameras.
77Using ATEM Software Control