User's Manual

Multi View layout options for ATEM Constellation 8K.
Labels Settings
The video input settings are used to select the inputs and change labels. Depending on your
ATEM switcher model, some video inputs can select between different video sources, such as
HDMI or SDI. You can identify switchable connections on the rear of the switcher because all
inputs are numbered and any inputs that can switch will have the same input number on
their label.
Label settings
For example, ATEM 1 M/E Production Studio 4K shares the Input 1 setting between an HDMI and
SDI connector, which are both labelled Input 1 on the back panel. In the ‘video inputs’ window,
click input 1 to select between HDMI and SDI.
70Using ATEM Software Control