User's Manual

ATEM currently supports the following video standards:
ATEM
Constellation 8K
ATEM
4 M/E Broadcast Studio 4K
ATEM
Production Studio 4K Models
– – 525i59.94 NTSC 4:3
– – 625i50 PAL 4:3
– – 252i59.94 NTSC 16:9
– – 625i50 PAL 16:9
720p50 720p50 720p50
720p59.94 720p59.94 720p59.94
1080i50 1080i50 1080i50
1080i59.94 1080i59.94 1080i59.94
1080p23.98 1080p23.98 1080p23.98
1080p24 1080p24 1080p24
1080p25 1080p25 1080p25
1080p29.97 1080p29.97 1080p29.97
1080p50 1080p50 1080p50
1080p59.94 1080p59.94 1080p59.94
2160p23.98 2160p23.98 2160p23.98
2160p24 2160p24 2160p24
2160p25 2160p25 2160p25
2160p29.97 2160p29.97 2160p29.97
2160p50 2160p50 –
2160p59.94 2160p59.94 –
4320p23.98 – –
4320p24 – –
4320p25 – –
4320p29.97 – –
4320p50 – –
4320p59.94 – –
To set the video standard, select the video standard from the menu and then select the set
button. Any time the video standard is changed, it will erase any frames you have loaded into
the media pool.
Setting the Multi View Video Standard
Use this dropdown menu to select the video standard on ATEM switchers that can support
UltraHD multi view output, such as ATEM 4 M/E Broadcast Studio 4K or ATEM Constellation 8K.
The multi view output on ATEM Constellation 8K supports four 4K Ultra HD or HD outputs or
one 8K output up to 4320p59.94 so you can monitor at higher quality when you connect an 8K
monitor or television. ATEM 4M/E Broadcast Studio 4K supports up to 2160p59.94. If you set
your ATEM to 2160p50 or 2160p59.94 video, the multi view will be automatically displayed
using 2160p25 or 2160p29.97 respectively so you can use a wider range of Ultra HD
televisions. However if you want to use a standard HD television, then you can also set the multi
view outputs to be down converted to HD for even greater monitor compatibility.
65Using ATEM Software Control