User's Manual

The audio is mixed in the Audio tab of ATEM Software Control and output over the SDI and
HDMI program outputs as embedded digital audio.
All ATEM switchers feature XLR or 1/4 inch jacks that let you monitor mixed audio on the
monitorXLR or TRS output. The audio mixer contains independent controls for setting the
monitor audio level and also for selecting solo audio monitoring when working with these
ATEMswitcher models.
For maximum flexibility, The ATEM 4 M/E Broadcast Studio 4K and 2 M/E Production Studio 4K
feature separate XLR monitor outputs that can be switched into an extra pair of program
audio outputs.
Using MADI with ATEM Constellation 8K
ATEM Constellation 8K supports digital audio with the MADI protocol, also known as
Multichannel Audio Digital Interface. MADI is popular with most professional audio
manufacturers, broadcasters and high end recording facilities. MADI ports on
ATEMConstellation 8K have robust BNC connectors and transmit audio data over 75 ohm
coaxial cables up to 100 meters long.
MADI OUT
TALKBACK
REF IN SDI INPUTS SDI OUTPUTS MULTIVIEW ANALOG AUDIOUSB
1 2 1
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6
5 9 13 17 21 25 29 33 37 1 5 9 13 17 21 1
2
3
4
CH 1
CH 2
CH 1
CH 2
OUT
2 6 10 14 18 22 26 30 34 38 2 6 10 14 18 22
3 7 11 15 19 23 27 31 35 39 3 7 11 15 19 23
4 8 12 16 20 24 28 32 36 40 4 8 12 16 20 24
IN
8K INPUTS 8K OUTPUTS
REMOTE
MADI IN
CONTROL
ATEM Constellation 8K has BNC connectors for MADI audio,
plus1/4” TRS connectors for analog audio in and out.
215Using Audio