User's Manual

1
AUXILIARY
Auxiliary Select
PANEL SETTINGS
HOME
Rotate the auxiliary select knob to assign a
dedicated auxiliary output for camera control
Master Black
Setting the master black setting to on or off enables or disables the master black
control, also known as the pedestal control. This is helpful if you want to lock the
pedestal so it cannot be accidentally adjusted during production. The pedestal is
controlled by turning the ring wheel on the joystick control knob clockwise or counter
clockwise. More information on the joystick control is provided in the following
sections.
Brightness
These settings let you adjust the brightness for the buttons, indicators, LEDs and LCDs
on your camera control panel. Rotate the corresponding control knobs for each setting
clockwise or counter clockwise to brighten or dim the lights.
CCU Panel Controls
The panel controls for each CCU are separated into three general sections. These include:
Scene Files and Camera Settings
Scene files are for storing all the camera parameters for each CCU. Camera settings can be
changed such as shutter speed, master gain, white balance and enabling color bars. More
information for these settings, plus the relative and absolute mode settings, are described in
detail in the following ‘controlling cameras’ section.
The upper section of each CCU is used to store and recall scene files, plus control
camera settings such as shutter speed, master gain, white balance and color bars
202Using ATEM Camera Control Panel