User's Manual

TRANS
EFFECTS
KEYS
DSK COLOR
MEDIA
PLAYER
SUPER
SOURCE
HYPER
DECK
AUX
SETUP PTZ
MACRO
The system control macros menu is accessed by pressing
the macro soft button on the system control ‘home’ menu.
CUT
SHIFT
ON
KEY 1
PLAY RECORD
SHOW
NAMES
RECALL
DELETE
HOME
STOP
BKGD
CUT AUTO
KEY 2 KEY 3 KEY 4
ON ON ON
1 2 3
4 5 6
7 8 9
CAM 0 CLR
PREV
TRANS
FILL
DIP
MIX
DSK 1
TIE
DSK 2
Control Panel
Switcher
Main
Backup
Main
Backup
TIE
DSK 1
CUT
DSK 2
CUT
DSK 1
AUTO
DSK 2
AUTO
FTB
LOOP
DVE
WIPE
Most of the menu buttons in the system control
macrosmenu are also available on the dedicated
macros block on the ATEM 2 M/E Broadcast Panel.
Play
When Recall is selected and you have loaded a macro by clicking on a macro button,
click the play icon to start playing the macro.
Recall/Recall and Run
Press this button to cycle through the two macro playback modes. When recall is
selected, anymacro you select for playback will be cued and ready to run as soon as
you press the play button. When recall and run is selected, any macro you select for
playback will runautomatically.
Delete
Select a macro you want to delete, then press the delete button. A message on the
system control LED display will ask you to confirm the deletion. Select yes from the
button below the LED display. Your macro is now deleted.
Show Names
Press and hold this button to reveal macro names in the source display.
Loop
Press the loop button to turn the loop feature on or off. When loop is on and a macro is
played, the macro will repeat until you press stop or turn off the loop feature. If you turn
off the loop feature while a macro is running, the macro will run until the end of its
recorded sequence.
193Using Macros