User's Manual

Congratulations! If your macro was successful, you should see your ATEM switcher perform a
mix from color bars to color 1 using a 3 second transition, pause for 2 seconds, then perform
another 3 second mix transition to black, all by clicking one button in the macros window!
YourATEM switcher will also display an orange border around your software control panel to
indicate a macro is playing.
If your macro doesn’t perform the way you expect it to, simply rerecord the macro you just
created following the previous steps.
To start recording a macro, select a macro slot, then click on
the create macro button. Type in your notes and click ‘record’.
While recording, the create macro button will change to
a‘record’ button. When you have completed your switcher
actions, click on the ‘record’ button to stop recording.
ATEM Software Control displays a red border to indicate when you are
recording a macro. The ‘add pause’ button located at the top of the red border
lets you enter durations for pauses between switcher actions.
184Using Macros