User's Manual

Set Audio Preferences
The ‘audio’ tab lets you select which outputs to use for audio monitoring. You can also mute
incoming talkback on SDI inputs and outputs prevent a potential feedback loop in the
talkback channels.
Audio Settings
ATEM Television Studio HD, ATEM Television Studio Pro HD and ATEM Television Studio Pro 4K
models also feature mix minus settings on SDI outputs 5 to 8 so you can mute the
corresponding input from its program return output. All 10 8K inputs and all 40 HD and Ultra HD
inputs of ATEM Constellation 8K are mix minus capable. For more information, refer to the
section titled, ‘Setting the Audio Output Behavior’.
Mix minus settings in the audio tab let you mute the corresponding input
from its program return output on some ATEM switcher models
Set and Label Video Input Settings
Different models of ATEM switchers allow some inputs to share connections on the rear panel.
For example on the ATEM 1 M/E Production Studio 4K model, input 1 can be switched between
HDMI and SDI.
While you’re setting inputs, you might also want to change the input labels. These labels appear
on the multi view and the hardware panel. There are two labels to change: a long label used in
software, and the short label that’s limited to 4 digits and used in the broadcast panel.
18Getting Started