User's Manual
Manually setting the IP address for your Windows computer.
Switcher Settings
Now you have the software control working, you’ll need to apply your switcher settings.
Clickon the gear icon on the lower left side of the interface to open the settings window of the
ATEMSoftware Control.
Set the switcher video standard
You can set the video standard to suit the region in which you are broadcasting, such as
2160p29.97, 1080i59.94, 720p59.94 or 525i59.94 NTSC if you are broadcasting in NTSC based
countries. If you are broadcasting in PAL based countries, you can set your video standard to
formats such as 1080i50, 720p50 or 625i50 PAL.
Set Video Standard
If you’re working with standard definition video equipment in the widescreen anamorphic 16:9
video format, select 525i59.94 16:9 for anamorphic NTSC or 625i50 16:9 for anamorphic PAL.
Make sure all your cameras and any connected HDMI devices are also set to the same video
standard, or they won’t be visible on the switcher video inputs. This is generally quite easy, as
countries have standards for their HD and Ultra HD broadcasts and all equipment sold in these
countries matches this standard or at the very least can be switched between standards.
Whenall video standards are matched, you should see connected devices show up in the
multi view video input windows.
17Getting Started