User's Manual

Dip Transition Settings
To perform a dip transition on the software control panel
1 On the preview bus, select the video source that you want on the program output.
2 Select the DIP transition style in the transition control block.
3 Expand the transition palette and select dip from the transition types bar.
4 Adjust the dip rate by entering a number in the rate window. The rate display in the
transition control block will update.
5 Select the dip source.
6 Perform the transition as an auto transition or manual transition from the transition
control block.
Dip Source Menu
To perform a dip transition on an ATEM hardware panel
1 On the preview bus, select the video source that you want on the program output.
2 Press the DIP button to select the dip transition type. The LCD menu will automatically
display the transition settings.
NOTE On an ATEM broadcast panel, press the SHIFT and DIP/MIX buttons to
select the dip transition type. The DIP/MIX button illuminates green. The
system control automatically navigates to the transition menu. To manually
navigate to the transition menu press HOME > TRANS.
3 In the system control use the control knob to adjust the dip rate. You can also enter
a rate duration using the number pad.
4 Use the corresponding control knob to select the dip source. You can also use the
select bus to select a dip source.
5 Perform the transition as an auto transition or manual transition from the transition
control block.
144Operating your ATEM Switcher