User's Manual
Installing Blackmagic ATEMSoftware on Mac
Before installing any software you will need administrator privileges. It is also a good idea to
uninstall any previous versions of ATEM software present on your computer.
1 Ensure you have the very latest driver. Visit www.blackmagicdesign.com/support
2 Open the “Blackmagic ATEM Switchers” folder from the disc or downloaded disk image
and launch the “Blackmagic ATEM Switchers Installer Software”.
3 Click Continue, Agree and Install buttons and the software will be installed on
your system.
4 Now restart your computer to enable the new software drivers.
Follow install prompts
Plugins and Applications that are Installed
The ATEM Switchers software installs the following components which are used by
ATEMSwitchers:
ATEM Software Control
Blackmagic ATEM Setup
Blackmagic ATEM Setup is used to configure network settings
including IP address, plus lets you update your ATEM switcher’s
internal software. You can also launch ATEM Software Control from
the setup utility by clicking onitsicon next to the settings icon.
13Getting Started