User's Manual

5 Press the set button to select the setting, use the rotary knob to select “VISCA”
andpress the set button to confirm this setting.
6 Press the “menu” to return to the settings menu and scroll down to the “VISCA” section.
7 Select the “Baud Rate” setting and use the set button and rotary knob to select the
proper baud rate for your remote head.
TIP Check the documentation for your PTZ remote head for the correct
RS-422 baud rate
8 Use the menu button to return to the settings menu. Underneath baud rate in the
“VISCA” section you’ll see the number of remote heads currently connected. Select
this item and press “set” to update this list and detect any connected heads. These
will automatically assigned to camera buttons 1 through 7, depending on the number of
remote heads detected.
Use the “set” button with VISCA connections selected to detect any
remote heads connected to ATEM Television Studio Pro HD.
TIP If the number of connected devices that appear doesn’t match the
physical number you have connected, check that all your camera heads are
powered and their RS-422 ports are plugged in correctly.
9 If you want to choose the tilt direction of your trackball, you can also scroll to the “PTZ”
setting in the settings menu and use the set button to toggle between ‘inverted’ and
‘normal’ modes.
98Using ATEM Television StudioPro Switchers