User's Manual

Primary Color
This feature enables precise color control over each of the RGB color channels for lift,
gamma and gain.
To adjust primary color:
1 Press the camera button for the camera you want to control.
2 If not already selected, press the primary color button to enable primary color control.
3 Press the lift, gamma or gain button to select the tonal range you want to adjust.
4 Rotate the camera trackball in any direction to apply color changes to your chosen
tonal range.
In primary color mode, press the lift, gamma, or gain tonal range you
want adjust, then rotate the trackball towards the desired color
In addition to using the trackball, you can make changes to the brightness and saturation
of the image using the following color adjustment knobs.
Level Rotate the level knob to increase the luminance and color channels
simultaneously. This increases the overall brightness of the image.
Y ADJ To increase or decrease the brightness, or luminance, for a specific tonal range,
rotate the Y ADJ knob clockwise or counterclockwise.
SAT The saturation knob lets you increase or decrease the amount of overall color in
the image.
Reset Buttons
The three reset buttons are used if you want undo recent color correction adjustments you
have made to the lift, gamma or gain tonal ranges.
These controls only affect the specific tonal range you have selected. For example,
pressing the reset buttons when gain is selected will only affect the gain tonal range.
Reset RGB Press this button to reset the RGB color channels for lift, gamma or gain to their
default neutral position without affecting luminance adjustments.
Reset All This button lets you reset luminance and RGB color channels to their default
neutral position for the selected camera, as well as all other color adjustments
such as hue and contrast.
Reset Level Press this button to reset the YRGB luminance and color channels to their default
neutral position.
96Using ATEM Television StudioPro Switchers