User's Manual

If you want to change the duration of the transition when using the auto button, go to the
Transition settings in the LCD menu and use the rotary knob next to the LCD to change
the duration.
To change the transition duration:
1 Press the menu button to display the menus.
2 Scroll through the menus to the “Transition” menu using the rotary knob.
3 Press the set button and you will see the transition menu page will be selected.
4 Now scroll down the list of items in the transition menu until you get to the rate setting.
5 Press the set button to select the setting and adjust the rotary knob to change it.
6 When you are happy with the change, press set to confirm and then press the menu
button to back out of the menus back to the main video preview screen.
Go to the transition settings in the LCD menu to change the transition rate
Transition Slider
The transition slider works in the same way as the fader bar on other ATEM hardware panels.
Just like a fader bar, using the slider gives you more control over a transition, compared to
pressing the auto button. This lets you create special effects. For example, you can hold a
transition between two sources by sliding half way into the transition creating a double
exposure effect. However, unlike the auto button, you don’t have to complete the transition!
Youcan return to the original source by sliding back to the start point instead of progressing
through to opposite end of the slider.
By performing a transition manually, you can also control the transition speed with greater
variations, for example gradually easing in and out of a transition.
The transition slider lets you control a transition manually
91Using ATEM Television StudioPro Switchers