User's Manual

Using the LCD Menus
The LCD Menus make the entire operation of the switcher available. In the examples above,
we used the menus and it’s a good idea to explore the menus to see what’s available. If you
have used the software control panel on an ATEM switcher in the past, then you will see that
each menu is like a palette on the software control panel and each palette on the software
control panel has a menu page on the LCD. However, there are a few extra LCD menus and
these include program, preview and aux source, the audio mixer, and there is also a settings
page for setting up your ATEM Television Studio HD.
To use the menus:
1 Press the menu button to display the menus.
2 Scroll with the knob through the menus to the menu you want.
3 Press the set button and you will see the menu page will be selected to use.
4 Now scroll down the list to the specific menu setting you want to change.
5 Select it by pressing the set button.
6 Now scroll through the list of options for this menu item.
7 Press set when you want to make the desired setting active.
8 Press menu a few times to go back to the main video preview screen.
Press the menu button to enter the LCD menu.
Use the knob to navigate through the settings and make adjustments, forexample
selecting the audio for input 4 and adjusting the audio level
88Using the ATEM Television Studio HD Front Panel