User's Manual

DSK 1 TIE and DSK 2 TIE
In a similar fashion to the KEY 1 TIE button, the DSK 1 and 2 TIE buttons will enable
downstream keyers 1 and 2 on the preview output, along with the next transition effects, and tie
them to the main transition control so that the downstream keyers can be taken to air with the
next transition.
When the downstream keyer is tied to the main transition, the transition will happen at the rate
specified in the transition rate setting.
DSK 1 CUT and DSK 2 CUT
The DSK CUT buttons for downstream keyers 1 and 2 are used to cut the downstream keyers
on or off air and indicates whether they are currently on or off air. The buttons are illuminated if
the DSKs are currently on air.
DSK 1 AUTO and DSK 2 AUTO
The DSK AUTO buttons will mix the downstream keyers on or off air at the rate specified in the
downstream keyer’s rate setting.
Source Select Buttons for Keyers and Macros
The source select row of numbered buttons above the program and preview rows are used to
set sources for the upstream keyer and each of the downstream keyers. You can also use these
buttons to record and run macros.
The source select buttons let you choose sources for keyers, such as the fill and cut source
Source Buttons Source
1 HDMI Input 1
2 HDMI input 2
3 HDMI input 3
4 HDMI input 4
5 SDI input 5
6 SDI input 6
7 SDI input 7
8 SDI input 8
9 Media Player 1
10 Media Player 1 Key
11 Media Player 2
12 Media Player 2 Key
101Using ATEM Television StudioPro Switchers