User's Manual

switcher's format. That means you can even have 8 inputs, all running different video formats.
The upgraded Fairlight audio mixer features dynamics, 6 band parametric EQ, dual mono
channel split and stereo simulator with audio delay on the analog inputs. The ATEM Television
Studio Pro 4K model also features the ATEM Advanced Chroma Key, Ultra HD support for the
multi-view output and motion clips in the media pool.
ATEM Television Studio Pro 4K
Plugging in Multi View Monitoring
To get started with your ATEM switcher, the first step is to plug in power and a monitor and see
it working! When power is connected, you will see the LCD and several buttons on the control
panel illuminated.
A convenient way to check that your ATEM is powered on and working correctly is to plug an
HDMI television or SDI monitor into the multi view output on the rear panel.
Looking at the multi view, you should see 8 video boxes at the bottom, and two larger boxes at
the top, all bound by white borders. Each box will have a label.
If you see this video output, then your ATEM is powered on and running fine! All you need to do
now is plug in some video sources so you can start using your switcher!
If you don’t see the multi view output on your television, check the connections and cables are
correct. You need to plug into the multi view connector on the rear of the ATEM. Next, check if
your television is compatible with the video standard set in the ATEM. If your television is not
compatible with the set standard, don’t worry, because you can quickly change the switcher's
video standard using the 'settings' LCD menu on the control panel. Simply press the 'menu'
button to open the menu and use the settings knob and 'set' button to navigate through the
menu items and change settings.
10Getting Started